POWER BRAKE CLEANER

315541

presto POWER Brake Cleaner with higher pressure for even more effective cleaning of removing oil, grease, dirt, brake fluid from brake drums, pads, discs, lines, cylinders and clutch parts.
It prevents brakes from squeaking and cleans engines, machines and other parts thoroughly without leaving a residue.

QUALITY AND PROPERTIES
High solvent power
acetone-free
free from aromatic compounds
Leaves no residue
Safe for use on o-rings and brake hoses
Special chemical composition
Powerful degreaser; blocks infiltration of water
Mechanical cleaning via concentrated spray jet
Contains no chlorinated hydrocarbons
Dries quickly leaving no residue
Non corrosive
Non conductive
Powerful, directed jet spray
Sprayable from any angle due to a special 360° valve
TRG 300 compliant

PHYSICAL AND CHEMICAL DATA
Basis: Aliphatic Hydrocarbons
Colour: transparent
Smell: characteristic
Propellant: carbon dioxide, propane/butane
Storage stability: 10 years if appropriate storage provided (=10° to 25°C, relative air humidity of max. 60%)
Size: aerosol can, maximum nominal volume 500 ml

ENVIRONMENT AND LABELLING
Environmentally sound: The products of MOTIP DUPLI are 100% free of heavy metals. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as special refuse.
Marking/Labelling: All products made by MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

USING INSTRUCTIONS
Before use, carefully read and observe the warning texts on the label!
Application:
Bring the can to room temperature.
Operating temperature 5° to 30°C.
Shake for 2 minutes before use.
Spray surface evenly until the dirt has disappeared.
Use a brush on stubborn dirt.
Turn off live parts and electrical equipment before application and turn on ca. 15 minutes after (brake cleaner contains flammable solvents).

TIPS FOR SPRAY PAINTING
Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.
Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!