presto Engine Cleaner effectively removes oil, grease, dirt and other impurities from engines and machines etc.
Dirt is quickly and gently dissolved and can be rinsed off with warm clean water.
Applications: washing machines, electrical machines, engines of cars and bikes
QUALITY AND PROPERTIES
Specially developed to remove oil and grease
Cleans engines and under bodies
Leaves no residue
Misty jet spray
TRG 300 compliant
PHYSICAL AND CHEMICAL DATA
Basis: Aliphatic Hydrocarbons
Relative density at 20C: 0.78 g/ml
Yield: 1.11 g/sec.
Vapour pressure at 20C: 3 to 4 bar
Refractive index at 20C: 1.434
Storage stability: 10 years if appropriate storage provided (=10 to 25C, relative air humidity of max. 60%)
Size: aerosol can, maximum nominal volume 400 ml
ENVIRONMENT AND LABELLING
Environmentally sound: The products of MOTIP DUPLI are 100% free of heavy metals. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as special refuse.
Marking/Labelling: All products made by MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
Before use, carefully read and observe the warning texts on the label!
Bring can to room temperature.
Operating temperature 5 to 30C.
Make sure that the engine has cooled down, first. Cover live parts and turn off electrical equipment before applying.
Shake for 2 minutes before use.
Evenly spray onto the surface to be treated. Clean stubborn dirt with a brush.
Leave for a few minutes the engine cleaner and then rinse with a high pressure cleaner or clean, warm water.
Separate water from oil with an oil separator, then dispose of waste as chemical waste.
Blow dry live parts with an air gun after cleaning.
Do not use engine cleaner as a general cleaning substance.
Avoid contact with skin and clothes.
TIPS FOR SPRAY PAINTING
Protect the object and the surrounding area from spray mist.
Temperature should range between +10C and +25C, max. air humidity 60 %.
Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!