AIRCONDITION CLEANER

215995

presto Aircondition Cleaner cleans and freshens air in vehicle air conditioning and circulation systems.
The cleaner forms foam after being applied on the vaporiser and the heating ducts and releases a pleasant fragrance.
QUALITY AND PROPERTIES
Lasting protection for smells
Subtle scent
Effective cleaning foam
TRG 300 compliant

PHYSICAL AND CHEMICAL DATA
Basis: Tenside solution
Colour: white
Smell: Orange
Appearance: white foam
Relative density at 20C: 0.967 g/ml
Coverage: one can for cleaning of a air-conditioning system
pH-value: 9.5 to 10.5
Storage stability: 10 years if appropriate storage provided (=10 to 25°C, relative air humidity of max. 60%)
Size: aerosol can, maximum nominal volume 400 ml

ENVIRONMENT AND LABELLING
Environmentally sound: The products of MOTIP DUPLI are 100% free of heavy metals. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as special refuse.
Marking/Labelling: All products made by MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

USING INSTRUCTIONS
Before use, carefully read and observe the warning texts on the label!
Application:
The aerosol should have room temperature.
Best processing temperature 5 to 30C.
Before use, shake the aerosol.
Before treatment, switch off the engine and the electrical installations.
Apply the foam to the condenser of the air conditioning by means of the enclosed adapter.
Insert the adapter about 30 centimetres into the air inlet of the air conditioning and completely empty the can.
The location of the air inlet differs per brand, consult your dealer.
After applying, do not switch on the engine or the electrical installations for at least half an hour.
In this half hour the foam will break and leave the system through the condensed water outlet as a fluid.

TIPS FOR SPRAY PAINTING
Protect the object and the surrounding area from spray mist.
Temperature should range between +10C and +25C, max. air humidity 60 %.
Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!