BRAKE CLEANER

306185

presto Brake Cleaner is suited for removing oil, grease, dirt, brake fluid from brake drums, pads, discs, lines, cylinders and clutch parts.
It prevents brakes from squeaking and cleans engines, machines and other parts thoroughly without leaving a residue.
Removes even acids.

QUALITY AND PROPERTIES
.High solvent power
.Leaves no residue
.Safe for use on o-rings and brake hoses
.Special chemical composition
.Powerful degreaser; blocks infiltration of water
.Mechanical cleaning via concentrated spray jet
.Contains no chlorinated hydrocarbons
.Dries quickly leaving no residue
.Non corrosive
.Non conductive
.Powerful, directed jet spray
.TRG 300 compliant

PHYSICAL AND CHEMICAL DATA
Basis: Aliphatic Hydrocarbons
Colour: transparent
Smell: characteristic
Relative density at 20C: 0.70 g/ml
Yield: 4.11 g/sec.
Vapour pressure at 20C: 5.5 to 6.5 bar
Refractive index at 20°C: 1.398
Propellant: carbon dioxide, propane/butane
Storage stability: 10 years if appropriate storage provided (=10 to 25C, relative air humidity of max. 60%)
Size: aerosol can, maximum nominal volume 500 ml

ENVIRONMENT AND LABELLING
Environmentally sound: The products of MOTIP DUPLI are 100% free of heavy metals. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as special refuse.
Marking/Labelling: All products made by MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

USING INSTRUCTIONS
Before use, carefully read and observe the warning texts on the label!
Application:
.Bring the can to room temperature.
.Operating temperature 5 to 30C.
.Cover coated or plastic parts.
.Shake for 2 minutes before use.
.Spray surface evenly until the dirt has disappeared.
.Use a brush on stubborn dirt.
.Turn off live parts and electrical equipment before application and turn on ca. 15 minutes after (brake cleaner contains flammable solvents).


TIPS FOR SPRAY PAINTING
Protect the object and the surrounding area from spray mist. Temperature should range between +10C and +25C, max. air humidity 60 %.
Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!
Bundle:500ml