LINEMARKER

895173

DUPLI-COLOR Linemarker for longlasting applications. Very durable quality.
Suitable for the marking of lines, parking lots, in industrial plants as well as for private purposes. With upside-down valve.
Available colour hues: blue, yellow, red, white and green.

The line marker can be used in the following accessories:
Speedliner
Speedmarker long
Speedmarker short
Speedmarker 2-wheel

QUALITY AND PROPERTIES
.High coverage, quick drying quality
.Special valve for floor applications ensures sharp edges
.Specially for use in Speedliner²
.For permanent markings
.Highly resistant to abrasion
.High weather resistance


PHYSICAL AND CHEMICAL DATA
.Basis: acrylic
.Colours: diverse
.Storage stability:
10 years if appropriate storage provided (=10°-25°C, relative air humidity max. 60%). .Efficiency:
Depending on condition and colour of the ground, 600 ml are sufficient for approx. 60 m of 10 cm wide lines
.Drying (at 20 C, 50% relative air humidity): Dust-dry: after approx. 10 minutes Dry to touch: after approx. 30 minutes Cured: after approx. 24 hours Can be overworked: after approx. 24 hours The drying time depends of temperature of surroundings, air humidity and thickness of the applied layer.
.Contents: aerosol cans with max. nominal volume of 600 ml


ENVIRONMENT AND LABELLING
Environmentally sound: The products of MOTIP DUPLI are 100% free of heavy metals. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as special refuse.
Marking/Labelling: All products made by MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

Application
.Shake can for approx. 3 minutes.
.After you hear the sound of the balls inside the can, vigorously shake the can for one more .minute.
.Test spray at an invisible spot.
.Spray distance approx. 25 cm.
.Apply the desired marking.
.In case of use in the Speedliner² marking trolley, attend to the corresponding manual.


TIPS FOR SPRAY PAINTING Protect the object and the surrounding area from spray mist. When painting small areas it is recommended that a piece of card is used as a mask, with a hole cut in it slightly larger than the area to be sprayed. The mask should be held 1 to 2 cm from the surface. With this method, the mainly part of the spray mist is brought under control. It recommends to mask parts not to be lacquered, to protect the surrounding against the spray mist. The aerosol can should have room temperature.
Temperature should range between +10C and +25C, max. air humidity 60 %.
Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!
ORDER INFORMATION
Product                                    Bundle            Art.No.
Strabenmarkierer blau 600       600 ml       895142
Straßenmarkierer gelb 600       600 ml       895159
Strabenmarkierer grün 600       600 ml       103063
Strabenmarkierer rot 600       600 ml       895166
Strabenmarkierer weiß 600       600 ml       895173